Pressure & Stress converter
Pressure is force per unit area.
1 bar = 14.50377377 pounds per square inch
1 pound per square inch = 0.06894757293 bar
Formula psi = bar × 14.50377377
Display options
Tip: you can type sums and fractions, such as 3/8, 1 1/2 or 2*(450+75).
1 bar in every pressure & stress unit
| Unit | Symbol | Value |
|---|---|---|
| Pascal | Pa | 100,000 |
| Kilopascal | kPa | 100 |
| Megapascal | MPa | 0.1 |
| Gigapascal | GPa | 0.0001 |
| Hectopascal | hPa | 1,000 |
| Newton per square millimeter | N/mm² | 0.1 |
| Bar | bar | 1 |
| Millibar | mbar | 1,000 |
| Standard atmosphere | atm | 0.9869232667 |
| Kilogram-force per square centimeter | kgf/cm² | 1.019716213 |
| Kilogram-force per square meter | kgf/m² | 10,197.16213 |
| Pound per square inch | psi | 14.50377377 |
| Kilopound per square inch | ksi | 0.01450377377 |
| Pound per square foot | psf | 2,088.543423 |
| Torr | Torr | 750.0616827 |
| Millimeter of mercury | mmHg | 750.0615758 |
| Inch of mercury | inHg | 29.52998016 |
| Millimeter of water | mmH₂O | 10,197.16213 |
| Inch of water | inH₂O | 401.463076 |
| Meter of water | mH₂O | 10.19716213 |
| Foot of water | ftH₂O | 33.45525633 |
| Barye | Ba | 1,000,000 |
About pressure & stress
Pressure is force per unit area. The SI unit is the pascal (1 N/m²). Because the pascal is small, engineers use kPa, MPa or bar for fluids and N/mm² (= MPa) for material stress. kgf/cm² remains common on Indian gauges and boilers; psi is standard in the US.
- Base unit here
- Pascal (Pa)
- Dimension
- M L⁻¹ T⁻²
- Units covered
- 22
Where it is used
- Pressure gauges, boilers and vessels
- Tyre pressure (psi, bar)
- Material strength and stress (MPa, N/mm², ksi)
- Vacuum and lab work (Torr, mmHg)
- HVAC duct pressure (Pa, inH₂O)
Pressure & Stress units reference
Each unit expressed in the pascal (Pa), the base unit used by this converter.
| Unit | Symbol | System | 1 unit equals |
|---|---|---|---|
| PascalOne newton per square meter. | Pa | SI | base unit |
| Kilopascal | kPa | SI | 1,000 Pa |
| MegapascalEqual to 1 N/mm². The standard unit for steel and concrete strength. | MPa | SI | 1,000,000 Pa |
| GigapascalUsed for elastic modulus (steel ≈ 200 GPa). | GPa | SI | 1,000,000,000 Pa |
| HectopascalEqual to 1 millibar; used in weather reports. | hPa | SI | 100 Pa |
| Newton per square millimeterIdentical to MPa. Used in Indian and European design codes for stress. | N/mm² | SI | 1,000,000 Pa |
| BarExactly 100 kPa, close to atmospheric pressure. | bar | Metric | 100,000 Pa |
| Millibar | mbar | Metric | 100 Pa |
| Standard atmosphereExactly 101,325 Pa; average sea-level pressure. | atm | Other | 101,325 Pa |
| Kilogram-force per square centimeterAlso called the technical atmosphere (at). Still printed on many Indian gauges and boiler plates. | kgf/cm² | Gravitational | 98,066.5 Pa |
| Kilogram-force per square meter | kgf/m² | Gravitational | 9.80665 Pa |
| Pound per square inchlbf/in² (≈ 6.895 kPa). Gauge pressure is often written psig. | psi | Imperial/US | 6,894.757293 Pa |
| Kilopound per square inch1,000 psi. US unit for material strength. | ksi | Imperial/US | 6,894,757.293 Pa |
| Pound per square footUsed for floor and wind loads in US codes. | psf | Imperial/US | 47.88025898 Pa |
| Torr1/760 of a standard atmosphere. Vacuum work. | Torr | Other | 133.3223684 Pa |
| Millimeter of mercuryConventional value 133.322 Pa. Blood pressure is measured in mmHg. | mmHg | Other | 133.3223874 Pa |
| Inch of mercuryConventional value. Used in aviation altimeters and US weather. | inHg | Other | 3,386.389 Pa |
| Millimeter of waterConventional value (9.80665 Pa). Used for low pressures in ducts and gas lines. | mmH₂O | Other | 9.80665 Pa |
| Inch of waterConventional value (249.089 Pa). US HVAC duct static pressure. | inH₂O | Other | 249.08891 Pa |
| Meter of waterPump head expressed as pressure (conventional, 9.80665 kPa). | mH₂O | Other | 9,806.65 Pa |
| Foot of water | ftH₂O | Other | 2,989.06692 Pa |
| BaryeCGS unit: 1 dyn/cm². | Ba | CGS | 0.1 Pa |